Ingersoll Rand Hammerhead Low-Profile Impactool, 1/2″, 45 Ft Lb – 140 Ft Lb; 180 Ft Lb Reverse – 1 per EA – 2025MAX

Description

• Head height of under 2Inches offers the accessibility of a ratchet. 1 per EA
• Knuckle-Saver reactionless torque eliminates kickback.
• Conveniently located forward/reverse ring provides unrestricted access to easily change the direction of the tool. which is critical in tight spaces where traditional tools get jammed.
• Feather-touch trigger delivers impressive control.
• Two-position power regulator provides MAX control in forward and always full power in reverse.
• Air Consumption @ Load=19 CFM.
• Air Consumption [Nom]=3.5 CFM.
• Cycle Rate [Nom]=2.
• 100 blows/min.
• Drive Size [Nom]=1/2 in.
• Free Speed [Nom]=7.
• 100 rpm.
• Height [Nom]=2 1/2 in.
• Hose Size [Nom]=3/8 in.
• Inlet Size=1/4 in (NPTF).
• Length [Nom]=14 1/2 in.
• Noise Level [Max]=94.1 dB.
• Torque [Max]=140 ft lb; 180 ft lb Reverse.
• Torque [Min]=45 ft lb.
• Width [Nom]=6 1/2 in.
• Wt.=4.2 lb.
• Head height of under 2Inches offers the accessibility of a ratchet.
• Knuckle-Saver reactionless torque eliminates kickback.
• Conveniently located forward/reverse ring provides unrestricted access to easily change the direction of the tool. which is critical in tight spaces where traditional tools get jammed.
• Feather-touch trigger delivers impressive control.
• Two-position power regulator provides MAX control in forward and always full power in reverse.

.